RT238 Retaining High Strength
Akfix RT238 is a single component, resin based, high viscosity, high strength product used for strengthening mechanical connections.
Share:
- Can be used on all kinds of rough surfaces.
- Fills gaps in worn out joints
- Fits bearings, prevents the dislocation.
- Fills smallest gaps due to its low viscosity and is used in sensitive fittings.
- Fits impellers and shafts together.
- Locks linings and boots to their beds and on the shaft.
- Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
- Apply the adhesive with a 360 turn to leading threads of the male and female fittings.
- Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
- Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
- For disassembly, use hand tools to remove mating parts. When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
| Stock Code | Product Code | Type | Volume | BoxQty |
|---|---|---|---|---|
| RT238_01 | - | Retaining | 50 ml | 120 |
| RT238_02 | - | Retaining | 250 ml | 36 |
