L270 Threadlocker (High Strength)
Akfix L270 is a single component, high strength (permanent) anaerobic thread locker. The product cures when confined in the absence of air between close-fitting metal surfaces.
Share:
- Formulated to lock metal fasteners;
- Particularly suitable for larger threaded fasteners, e.g. studs and all applications where maximum strength is needed.
- Prevents corrosion of assembled parts.
- Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
- Apply the adhesive with a 360 turn to leading threads of the male and female fittings.
- Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
- Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
- For disassembly, use hand tools to remove mating parts. When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
| Stock Code | Product Code | Type | Volume | BoxQty |
|---|---|---|---|---|
| L270_01 | - | Threadlocker | 50 ml | 120 |
| L270_02 | - | Threadlocker | 250 ml | 36 |
