L222 Threadlocker (Low Strength)
Akfix L222 is a low-strength, easy to remove screw lock. Works on all metals, especially good on low strength metals which could damage during disassembly, e.g. brass or aluminium.
Share:
- Ideal for low-strength thread-locking of adjusting screws.
- Easy to remove screw lock.
- Especially good on low strength metals which could damage during disassembly, e.g. brass or aluminium.
- Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
- Apply the adhesive with a 360 turn to leading threads of the male and female fittings.
- Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
- Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
- For disassembly, use hand tools to remove mating parts. When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
| Stock Code | Product Code | Type | Volume | BoxQty |
|---|---|---|---|---|
| L222_01 | - | Threadlocker | 50 ml | 120 |
| L222_02 | - | Threadlocker | 250 ml | 36 |
